Foxl

Shopping Cart

DISCLEANER OEM - original

Brand : ROCHEM

Sold By : M/S ROCHEM INDIA PVT LTD

A concentrated water based blend of inhibited acids, surfactants and emulsifying agents that has been specifically developed to remove heavy, tenacious, carbonaceous and varnish deposits from lube and fuel oil separator discs

Category: Chemicals & Industrial Paints

Product Type: OEM - original
Estimated Lead Time
  • Upto 1 ltr- to be negotiated

DESCRIPTION

ROCHEM DISCLEANER is a concentrated water based blend of inhibited acids, surfactants and emulsifying agents that has been specifically developed to remove heavy, tenacious, carbonaceous and varnish deposits from lube and fuel oil separator discs. It is extremely effective in removing these deposits without the necessity of separating the discs from the stack.

GENERAL SPECIFICATIONS

DESCRIPTION

ROCHEM DISCLEANER is a concentrated water based blend of inhibited acids, surfactants and emulsifying agents that has been specifically developed to remove heavy, tenacious, carbonaceous and varnish deposits from lube and fuel oil separator discs. It is extremely effective in removing these deposits without the necessity of separating the discs from the stack.

GENERAL SPECIFICATIONS

Appearance                           : Clear , colourless liquid
Specific Gravity                     : 1.2 -1.3
pH (10% Solution) Solubility  : 1.0 - 2.0
Flash Point                             : None
Freeze Point                          : -5 C

ADVANTAGES

ROCHEM DISCLEANER’s special blend of active ingredients has led to significant benefits for operators of lube and fuel oil separators.

  •   Highly concentrated and completely water soluble.

  •   Easy to dilute, rapid cleaning, very cost effective.

  •  Does not attack stainless steel and does not damage discs.

  •   Does not contain chlorinated hydrocarbons.

  •   Biodegradable and environmentally safe.

  •  Cleans down to metal surfaces, leaves no film or residue. DIRECTIONS FOR USE AND DOSAGE RATE

    ROCHEM DISCLEANER may be used neat or diluted down to 20% by volume with fresh water, depending upon the severity of contamination, availability of heat and time available for cleaning. The higher the concentration, more efficient is the cleaning action. The time for a cleaning operation will varry from half an hour to 2 hours depending upon the above factors.

    METHOD OF CLEANING

    Separators can be cleaned by –

    1. Removing the separator disc stack and soaking in a solution of ROCHEM DISCLEANER.

    2. Removing the separator discs and dismantling stack, then soaking discs in ROCHEM DISCLEANER. Discs can be sprayed if soaking tank is not available.Circulating the solution and heating will enhance cleaning in both the above cases.

    CAUTION

    Treat as you would any acid. Wear protective gloves, goggles and outer clothing when handling. If product comes into contact with skin or eyes, flush immediately with water for at least 15 minutes while removing contaminated clothing. Call a physician, if required.

     

ARINDAM

Please Login to rate this product

Key Features

No FAQ Found !

Related Products